Simulation Outputs

Nodout is defined for the four accelerometers of the SET, with Node id (NID) and names below.

NID 50F	NID 50M	Name
1000001	1019098	Head_Accelerometer
4052869	4057986	T1_Accelerometer
4052891	5036048	T8_Accelerometer
5031735	6000000	Pelvis_Accelerometer

The default DATABASE_NODOUT output time interval (dt) is set to 0.1ms.

The FE SET models contain a DATABASE_EXTENT_SSSTAT card, defining the body regions needed to measure the mass distribution of the models (see Model Reference: Measured Mass. The used part sets and names shown in the output ssstat is shown below. The user has to define a DATABASE_SSSTAT_MASS_PROPERTIES card to get the ssstat mass output with a user defined output time interval (dt).

SETID	Name
100000	Measure_Head_and_Neck_Mass
300000	Measure_Arms_Mass
456000	Measure_Torso_and_Pelvis_Mass
700000	Measure_Legs_Mass

Any other outputs have to be defined by the user.

The FE SET models come with color map files (Color_Map_FE-SET-50F and Color_Map_FE-SET-50M) that can be used with LS-PrePost, see figure on main page.